#GARMIN BACKUP CAMERA BC30 PAIRING INSTALL#
#GARMIN BACKUP CAMERA BC30 PAIRING LICENSE#

Works with many current nüvi® and dezl™ products.

Can be used together with up to four cameras.

Robust enough to withstand tough weather conditions.

Transmits video images wirelessly with a range.

Enables the connection to a constant current source.

Shows recordings directly on the display of the navigation system on.

Shows in the reverse gear, which is behind the vehicle, there.

Tucked up the cables and replaced the taillight cover Works perfectly.

#GARMIN BACKUP CAMERA BC30 PAIRING LICENSE#

Ran the power cable down to the camera mounted on the license plate. Up to 4 cameras can be used together in one system, so that you can have multiple viewing angle. Took the taillight cover off, spliced into the power to the reverse lights there and mounted the transmitter right there (plenty of room). The BC30 is so sturdy that it resists even extreme weather conditions.

#GARMIN BACKUP CAMERA BC30 PAIRING INSTALL#

You must install the camera at the rear of the vehicle and a power source, such as the taillights. If you are familiar but really good and experienced, you can also even to the installation wagon. Garmin recommends that the BC30 from your dealer to install. Installation by specialist personnel recommended For some vehicles may be sold separately extension cable is required.) The transmitter transmits the images to the receiver bracket of the navigation systems, the transmission range of up to 10 meters. The system can also be connected with a constant current source, so that you can press a button to switch between the navigation display and the display mode for the rear view. When a forward gear is inserted, the device changes back to the navigation mode. If the camera via the reversing is supplied with power, the navigation device automatically when in reverse the camera image displays. If you enable wireless rear view camera BC30 with a compatible Navi coupling, you can vehicles, cyclists, pedestrians, animals and other obstacles, which are only difficult to see is very easy. Reduce the risk of accidents in the dead angle when driving in reverse. If this happens to you be sure to check this as this may be a very quick solution to an illusive problem.A high-quality rear-view camera, such as the Garmin BC30 can be used for operator to significantly improve the rear view. The BC 30 indeed is better in this category. Moreover, if your car has multiple blind spots, you can easily add more BC 30 cameras.

This is particularly helpful when you need to point a camera from multiple angles. My screen showed black in both instances so a relay was not called for.įinally, in cooperation with tech support, since I was able to see the guide lines for distance on my screen but not the picture - apparently the signal from the camera to the transmitter connection may have loosened up. On the other hand, the Garmin BC 30 can pair up to 4 devices.

Next I followed the trouble shooting guide that suggested that if I had the engine running and put the car in reverse and it showed a black screen, I should turn the engine off, but leave the key in the on position, and if I can see the camera working OK - I should have a relay installed. I was using the Garmin BC30 wireless backup camera system. I first thought this was someones idea of a bad joke - maybe they spray painted the camera lens. One day I got in the car, hooked up my Garmin GPS I put the car in reverse and instead of seeing what was behind me all I could see was a black screen. Recently I had a GPS Backup Camera that was working perfectly.

Garmin backup camera bc30 pairing